MDM & Device Owner Bypass via QR — IT Admin, Kiosko, Telcel

What is this service?

This service delivers a QR code that, just by installing it, performs the Device Owner / MDM lock bypass on your Android device. Device Owner mode (or MDM, Mobile Device Management) is an administration profile that a company, institution or financing provider installs to control the device: it enforces policies, restricts features or leaves it in kiosk mode. When that profile blocks normal use of the phone, this QR frees it.

With our QR code, you simply run the installation and that's it.

Which locks does it cover?

It supports multiple brands and models with IT Admin, Kiosko, Telcel and Claro locks, among others. You can request the QR with the DNS you need; the available variants are:

• DNS IT Admin
• DNS Kiosko MDM
• DNS Telcel-Claro
• DNS Samsung Knox

How does the QR code work?

1. You place the order and receive your QR code (automatic API delivery, 24/7).
2. You install the QR on the device following the procedure.
3. When finished, verify that Device Owner is set.

Advantages

• Reusable: you can reset and repeat the process as many times as you need.
• DNS change: it lets you change the DNS if you want.
• High security: the profile is anchored with high security.
• Reset under your control: you can enable or disable the device reset as needed.

Important conditions

• The QR is unique: it can only be used on the same device.
• Save the QR and the admin Password/Pin for future use.
• No cancellations: once the QR is delivered there are no service cancellations. If you pick the wrong lock or can't use it, simply save it for another device.
• Does not remove KG Locked.
• Samsung not supported.

How long does it take?

Delivery is instant: the QR code is generated automatically via API, available 24/7.

Frequently asked questions

What is a Device Owner or MDM lock? It's an administration profile that controls the phone (policies, restrictions, kiosk mode), usually installed by a company, institution or financing provider. This QR performs the bypass so you can use the device again.

Does it work for IT Admin, Kiosko, Telcel or Claro locks? Yes. It supports multiple brands and models with those locks; you choose the DNS (IT Admin, Kiosko MDM, Telcel-Claro or Samsung Knox) when placing the order.

Can I repeat the process? Yes. The QR lets you reset and repeat the bypass as many times as you need on the same device; keep the QR and the admin PIN.

Does it work on Samsung or remove the KG Lock? No. This service does not remove KG Locked and Samsung is not supported.